DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Plausibility check between TPS 1 and TPS 2	Poor connector connection Faulty TPS 1 or TPS 2 sensor Faulty ECM/PCM
Enable Conditions	Engine speed is higher than 320 RPM
Threshold Value	Output signal value of deviation between TPS 2 and TPS 1 is higher than 6.3% Output signal value of deviation between TPS 2 and target TPS is higher than 9%
Diagnostic Time	Continuous
MIL ON Condition	1 driving cycle