FixVault
Home › Kia › 2021 › Sedona EX › Repair and Diagnosis › Body & Frame › Door Locks › Power Sliding Door System › Power Sliding Door (PSD) Control Module › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the luggage side trim [LH].

    (Refer to Body - "LUGGAGE SIDE TRIM ")

  3. Disconnect the power sliding door control module connector (A).
  4. Remove the power sliding door control module (B) after loosening the screws.
G13047299Courtesy of KIA MOTORS AMERICA, INC.
About FixVault