DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible cause
DTC Strategy	Level 2 monitoring (=Process monitoring)	Poor Connector Connection Faulty ECM
Enable Conditions	Ignition "ON" Engine speed during engine start is higher than 32 RPM
Threshold Value	Actual value is higher or lower than allowable range (ADC monitoring or Engine speed ratio monitor or Idle speed controller monitor or torque loss monitor or Min/Max Clutch torque monitor or Pedal value monitor or TPS ratio monitor or Mass fuel flow monitor errors)
Diagnostic Time	480 ms
MIL ON Condition	1 driving cycle