FixVault

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible cause
DTC Strategy
  • Coolant temperature is not reached warm up state
  1. Thermostat open stuck
  2. Poor connection or damaged harness
Enable Conditions
  • Fuel-cut off phase is less than 20%
  • Low load phase is less than 50%
  • High vehicle speed phase is less than 90.2% (vehicle speed is greater than 140km/h (87 Mph))
  • Engine speed is less than 4800 RPM
  • ECT change is greater than -2.25°C (27.95°F) during 15s
  • Intake air temperature is 20.3°C (68.54°F) greater than IAT at engine start.
  • Battery voltage is between 11V and 16V
  • Engine Coolant Temperature at start between -9.8°C (14°F) and 54.8°C (131°F)
  • Intake air temperature at engine start is greater than -9.8°C (14°F)
  • Ambient Air Temperature (AAT) is greater than -9.8°C (14°F)
Threshold value
  • Measured coolant temperature is less than 69 to 79°C (156.2 to 174.2°F)
  • When modeled coolant temperature is greater than 80 to 90°C (176 to 194°F)
Diagnosis Time
  • 10 to 30m depending on coolant temperature at start and driving pattern
MIL On Condition
  • 2 driving cycles