FixVault
Home › Kia › 2021 › Seltos EX › Repair and Diagnosis › External Pages › Different car › Section 141 (Engine Control System - 2.0L) › Intake Middle Lock Control Solenoid › Repair Procedures › Inspection › Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the intake middle lock control solenoid connector.
  3. Measure resistance between the intake middle lock control solenoid terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  10.8 - 12.8 [20°C (68°F)]

About FixVault