FixVault
Home › Kia › 2022 › Sorento EX › Repair and Diagnosis › External Pages › Different car › Section 114 (Automatic Transaxle Control System (PHEV)) › Transaxle Control Module (TCM) › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
  2. Perform the TCM reset and learning procedure by using the KDS after replacing the TCM.
    1. Click the "Oil-pressure Characteristics Back-Up And Input (TCU Replacement)".
      G14957254Courtesy of KIA MOTORS AMERICA, INC.
    2. Check the condition and then click the "OK".
      G14957255Courtesy of KIA MOTORS AMERICA, INC.
    3. Click the "Input".
      G14957256Courtesy of KIA MOTORS AMERICA, INC.
    4. Click the "OK".
      G14957257Courtesy of KIA MOTORS AMERICA, INC.
  3. Perform TCM learning procedure.

    (Refer to Automatic Transaxle System - "ADJUSTMENT ")

About FixVault