Removal & Installation
NOTE:
Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Disconnect the connector (A), and then remove the sensor (B).
Heated oxygen sensor:
39.2 - 49.1 N.m (4.0 - 5.0 kgf.m, 28.9 - 36.2 lb.ft)
[Bank 1/Sensor 1]
 Courtesy of KIA MOTORS AMERICA, INC.
|
 Courtesy of KIA MOTORS AMERICA, INC.
|
[Bank 1/Sensor 2]
 Courtesy of KIA MOTORS AMERICA, INC.
|
 Courtesy of KIA MOTORS AMERICA, INC.
|