FixVault
Home › Kia › 2023 › Carnival EX › Repair and Diagnosis › External Pages › Different car › Section 29 (Automatic Transaxle Control System) › Position Switch › Removal

Position Switch: Removal

WARNING: This page is about a different car, the 2024 Kia Carnival. However, it is still accessible from the selected car via links, so may be relevant.
  1. Shift transaxle to "N".
  2. Disconnect the battery negative (-) cable.
  3. Remove the air duct and air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  4. Disconnect the position switch connector (A).
    G14797559Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the shift cable after removing the nut (A).
    G14797560Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the manual control lever (A) and the washer after removing the nut.
    G14797561Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the position switch (A) after removing the bolts.
G14797562Courtesy of KIA MOTORS AMERICA, INC.
About FixVault