Circuit Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Voltage inspection (HO2S (Bank1, Sensor2) ↔ Chassis ground) |
|
HO2S (Bank1, Sensor2) connector | 1 (signal) | Chassis ground | - | Approx. 2.3V |
| HO2S (Bank1, Sensor2) connector | 2 (ground) | Chassis ground | - | Approx. 0.6V | ||
| Voltage inspection (HO2S (Bank1, Sensor2) ↔ Chassis ground) |
|
HO2S (Bank1, Sensor2) connector | 1 (signal) | Chassis ground | - | Approx. 2.3V |
| HO2S (Bank1, Sensor2) connector | 2 (ground) | Chassis ground | - | Approx. 0.6V | ||
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Repair open or short in circuit and then Go to "VERIFICATION OF REPAIR " procedure.