Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (VCU ↔ Chassis ground) |
|
VCU connector (2WD) | 18, 19, 66, 68 (power) | Chassis ground | - | B+ |
| VCU connector (4WD) | 6, 51, 67, 73, 87 (power) | Chassis ground | - | B+ | ||
| Open in circuit inspection (VCU ↔ Chassis ground) |
|
VCU connector (2WD) | 65, 67 (ground) | Chassis ground | - | Approx. below 1Ω |
| VCU connector (4WD) | 4, 7, 29, 68 (ground) | Chassis ground | - | Approx. below 1Ω | ||
Good
- Go to "P1-CAN INSPECTION " procedure.
No Good
- Repair or replace as necessary and go to "VERIFICATION OF REPAIR " procedure.
- Repair open or short in circuit and then go to "VERIFICATION OF REPAIR " procedure.