Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (TCM ↔ Chassis ground) |
|
G 1.6 T-GDI TCM connector | 17, 67, 68 (power) | Chassis ground | - | B+ |
| G 2.0 MPI NU PCM connector | 64, 85 (power) | Chassis ground | - | B+ | ||
| Open in Circuit Inspection (TCM ↔ Chassis ground) |
|
G 1.6 T-GDI TCM connector | 71, 73, 74 (ground) | Chassis ground | - | Approx. below 1Ω |
| G 2.0 MPI NU PCM connector | 45, 46 (ground) | Chassis ground | - | Approx. below 1Ω | ||
Good
- Go to "P-CAN INSPECTION" procedure.
No Good
- Repair or replace as necessary and then go to "VERIFICATION OF REPAIR" procedure.