Repair Procedures: Inspection
WARNING: This page is about a different car, the 2025 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF.
- Disconnect the VCMA connector.
- Check that the VCMA is not stuck by foreign material.
- Measure resistance between motor (+) and (-) control terminals of the motor.
- Check that the resistance is within the specification.
Specification: 3.4 - 4.4 Ω [20°C (68°F)]
- Measure resistance between voltage supply terminal and ground terminal of the position sensor.
- Check that the resistance is within the specification.
Specification: 3.44 - 5.16 Ω [20°C (68°F)]