Component Inspection
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
| 1. Ignition "OFF". 2. Disconnect the electrical connector(s) from the ATS. |
ATS (component side) | 1 (signal) | ATS (component side) | 2 (ground) | Table1 |
Table1) Specification of ATS
| Ambient Temperature (°C (°F)) | Resistance (k?) | Temperature (°C (°F)) | Temperature (°C (°F)) |
|---|---|---|---|
| -10 (14) | 164.20 (32) | 10 (50) | 59.6 |
| 0 (32) | 97.5 | 20 (68) | 37.46 |
Good
• Go to "Verification of Repair" procedure.
No Good
• Carefully re-do this troubleshooting guide steps.
• If no problems were found with the circuits or connectors, replace the ATS and go to "Verification of Repair" procedure.