| DTC Strategy |
- Level 2 monitoring (=process monitoring)
|
- Poor connector connection
- Faulty PCM
|
| Enable Condition |
- Ignition "ON" or engine running
- Engine speed during engine start is higher than 32 RPM
|
| Threshold Value |
- Actual value is higher or lower than allowable range (ADC monitoring or engine speed ratio monitor or idle speed controller monitor or torque loss monitor or minimum/maximum clutch torque monitor or pedal value monitor or TPS ratio monitor or mass fuel flow monitor errors)
|
| Diagnostic Time |
|
| MIL ON Condition |
|