Removal And Installation: Installation

Install in the reverse order of removal.
NOTE:
- If not performing the oil pressure characteristics input procedure, a shift shock or delay may occur.
- The existing valve body cover gasket (A) must be replaced with a new one (do not reuse).
Courtesy of KIA MOTORS AMERICA, INC.
Perform the procedures below after in replacing the valve body assembly.
1. Refill the automatic transaxle fluid.
  (Refer to Hydraulic System - "FLUID ")
2. Refill the coolant.
  (Refer to Engine Mechanical System - "COOLANT ")
3. Check for leakage of coolant or fluid from hose connection while the engine is starting and running.