FixVault
Home › Land Rover › 1987 › Range Rover › Repair and Diagnosis › Steering › Steering Columns - Range Rover › Removal & Installation › Steering Column Lock Assembly › Installation

Steering Column Lock Assembly: Installation

  1. Position the steering lock upper cap on the outer column, placing the spigot in the hole provided.
  2. Place the lower lock assembly into the column.
  3. Install the shear bolts to retain the cap and lock.
  4. Tighten the bolts sufficient enough to shear off the heads. See Figure .
  5. Reverse removal procedure steps  1 through  4 .
About FixVault