FixVault
Home › Land Rover › 1990 › Range Rover Base › Repair and Diagnosis › Steering › Power Steering › Power Recirculating Ball › Removal & Installation › Drop Arm › Removal

Drop Arm: Removal

  1. Place vehicle on a hoist, or support front axle on axle stands.
  2. Disconnect drag link from drop arm ball joint using taper joint extractor tool (LRT 57 018), or equivalent. See Figure .
  3. Remove drop arm using special tool (LRT 57 012), see SPECIAL TOOLS  . Loosen drop arm securing nut, but do not remove before using extractor. See Figure .
About FixVault