ABS Warning Light
WARNING:
Power assisted braking is not available if ignition is switched off. An increase in effort at pedal will be required to apply brakes.
WARNING:
Reduced ABS control is possible with ABS warning light illuminated depending on severity and type of fault. If both ABS and brake failure warning lights are illuminated, loss of system pressure or hydraulic pump failure is indicated. It is essential that driver has fault investigated immediately.
The ABS warning light situated in instrument panel indicates that there is a failure in ABS system The light will illuminate when ignition is switched ON, and will extinguish when vehicle exceeds 7 km/h (5 mph). This indicates that system belt monitoring check was successful, and system performs correctly.
If light remains on or subsequently illuminates with ignition ON a fault in ABS system is indicated. The self monitoring procedure is repeated frequently while ignition is ON. If a fault is detected during self monitoring, light will illuminate indicating that one or more wheels are not under ABS control. See Figure .