Ignition Systems: Distributor: Removal

Disconnect battery negative terminal. Disconnect vacuum hose. Remove distributor cap. Disconnect low tension lead from coil. Mark distributor body in relation to center line of rotor arm. See Fig 1 . Add alignment marks to distributor and front cover. See Fig 2 . Release distributor clamp and remove distributor.

Fig 1: Aligning Rotor Arm-To-Distributor Body

Courtesy of LAND ROVER NORTH AMERICA, INC.

Fig 2: Aligning Front Cover-To-Distributor

Courtesy of LAND ROVER NORTH AMERICA, INC.