FixVault
Home › Land Rover › 2000 › Discovery › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Interior Trim Components › 76.64.15.21 Headlining › Refit

76.64.15.21 Headlining: Refit

  1. Fit rear console and mounting plates to headlining.
  2. Fit and tighten nuts securing rear console to headlining.
  3. Fit both stowage pockets and mounting plates to headlining.
  4. Fit and tighten nuts securing stowage pockets to headlining.
  5. Models with rear A/C: 
    1. Fit 3 central air vents to headlining.
    2. Fit 2 rear air vents to headlining.
    3. Fit foam pads to air vents.
  6. With assistance, position headlining in vehicle.
  7. Fit and tighten screw securing center of headlining to roof.
  8. Connect multiplug to rear sunroof switch.
  9. Fit rear sunroof switch to rear console.
  10. Fit clips securing rear edge of headlining to sunroof.
  11. Position rear interior lamp to headlining and connect multiplug.
  12. Fit rear interior lamp to headlining.
  13. Models with rear A/C: 
    1. Position rear A/C control panel to headlining and connect multiplugs and Lucar connectors.
    2. Fit rear A/C control panel to headlining.
  14. Models with volumetric alarm:  Connect multiplug to front volumetric sensor and fit sensor to headlining.
  15. Fit grab handles to headlining and secure with bolts.
  16. Fit end caps to grab handles.
  17. Fit front sunroof aperture trim.
  18. Fit rear sunroof aperture trim.
  19. Fit tail door aperture upper trim casing.
  20. Fit sun visor clips to headlining and secure with screws.
  21. Fit caps to sun visor clips.
  22. Position front stowage pocket to headlining and connect multiplugs to sunroof switches.
  23. Fit and tighten 10 screws securing front stowage pocket to headlining.
  24. Connect multiplug to front interior lamp.
  25. Fit front interior lamp to headlining and secure with nuts.
  26. Fit lens to front interior lamp.
  27. Fit and tighten screw securing front stowage pocket to headlining.
  28. Fit access panel to front edge of front stowage pocket.
  29. Position sun visor to headlining and secure to clip.
  30. Connect multiplug to sun visor.
  31. Fit and tighten screws securing sun visor to headlining.
  32. Repeat process for second sun visor.
  33. Models with premium ICE:  Position both 'A' post trim casings and connect multiplugs to speakers.
  34. Fit both trim casings to 'A' posts and secure with clips.
  35. Fit both 'B' post upper trim casings.

    Refer to TRIM CASING - UPPER - 'B' POST .

  36. Fit both 'D' post trim casings.

    Refer to TRIM CASING - 'D' POST .

About FixVault