- Position cloth under modulator to absorb fluid spillage.
CAUTION:
Brake fluid will damage paint finished surfaces. If spilled, immediately remove fluid and clean.
- Disconnect 3 multiplugs from ABS modulator. See Fig 1.
- Disconnect 2 inlet brake pipe unions from pump side of modulator.
CAUTION:
Always fit plugs to open connections to prevent contamination.
- Disconnect 4 outlet brake pipe unions from top of modulator. See Fig 1.
CAUTION:
Always fit plugs to open connections to prevent contamination.
- Loosen 3 nuts securing modulator to mounting bracket.
- Release and remove modulator from mounting bracket.
- Remove 3 mounting rubbers from modulator.