FixVault
Home › Land Rover › 2000 › Range Rover Base › Repair and Diagnosis › External Pages › Different car › Section 38 (Interior Trim Components) › 76.25.01 Console - center - automatic models › Refit

76.25.01 Console - center - automatic models: Refit

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Land Rover Discovery, 2003 Land Rover Discovery, 2002 Land Rover Discovery, 2001 Land Rover Discovery, and 2000 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit and secure cigar lighter body to console.
  2. Fit lid to console and secure with screws.
  3. Fit console.
  4. Connect multiplug and bulb to cigar lighter.
  5. Fit center console to fascia.
  6. Fit 2 bolts securing rear of console to transmission tunnel.
  7. Connect multiplugs to seat switches.
  8. Fit switches to console.
  9. Move handbrake to lowered position.
  10. Fit cable to handbrake and secure with clevis pin and clip.
  11. Fit handbrake gaiter to console.
  12. Fit bolts securing forward edge of console to transmission tunnel.
  13. Models with veneer trim:  Position veneered console cover and connect multiplugs to switch pack. Fit cigar lighter element and secure veneered console cover to console.
  14. Models with base trim:  Connect multiplugs to switch pack, fit switch pack to console and secure with screws.
  15. Models with base trim:  Fit cover plate to switch pack, and rubber mat to console.
  16. Fit transfer box gaiter and knob to lever.
  17. Secure transfer box gaiter to console.
  18. Connect multiplug to selector panel, fit and secure panel to center console.
  19. Fit spacer and knob to gear selector lever.
  20. Models from 03MY:  Fit both center console cup holders.
About FixVault