FixVault
Home › Land Rover › 2000 › Range Rover Base › Repair and Diagnosis › Transmission › Automatic Trans › On-Vehicle Servicing › Removal & Installation › Gear Selector Lever Assembly › Removal

Gear Selector Lever Assembly: Removal

  1. Select Park. Remove ignition key. Remove center console. See CENTER CONSOLE  . Remove sound deadener pad. See Figure . Select 1st gear. Disconnect selector cable from lever. Remove "C" clip securing cable outer to gear selector lever bracket. See Figure .
  2. If gear selector lever assembly is to be refitted, mark relationship of lever bracket to transmission tunnel. Disconnect connector. Remove 6 bolts securing gear selector lever assembly to transmission tunnel. Remove gear selector lever assembly. Collect gasket.
About FixVault