Torque Specifications
WARNING: This page is about a different car, the 2004 Land Rover Range Rover and 2003 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Axle Shaft Nut | 311 (420) | ||
| Brakeline Flare Nut | 10 (14) | ||
| Caliper Bleed Screw | 10 (14) | ||
| Caliper Frame To Hub Bolt - Front | 81 (110) | ||
| Caliper Frame To Hub Bolt - Rear | 48 (65) | ||
| Caliper Guide Pin Bolt | 24 (33) | ||
| Exhaust System Flange Nuts | 33 (45) | ||
| Front Hub-To-Strut Bolt | 184 (250) | ||
| Front Tie Rod End Ball Joint | 59 (80) | ||
| Front Lower Control Arm Ball Joint | 59 (80) | ||
| Front Stabilizer Rod Ball Joint | 59 (80) | ||
| Master Cylinder Nuts | 19 (26) | ||
| Parking Brake Lever-To-Bracket Nuts | 15 (21) | ||
| Rear Drive Shaft-To-Differential Nuts | 50 (70) | ||
| Rear Drive Shaft-To-Transfer Box Bolts | 63 (85) | ||
| Rear Drive Shaft Support Bearing-To-Body Nuts | 15 (21) | ||
| Rear Hub-To-Lower Control Arm | 184 (250) | ||
| Rear Level Sensor Lever Bolt | 14 (19) | ||
| Rear Tie Rod-To-Hub Nut | 121 (165) | ||
| Rear Tie Rod-To-Subframe Nut | 121 (165) | ||
| Rear Upper Control Arm-To-Hub Bolt | 121 (165) | ||
| Rotor Retaining Set Screw | 12 (16) | ||
| Steering Wheel Retaining Bolt | 46 (63) | ||
| Vacuum Booster Nuts (1) | 19 (26) | ||
| Wheel Lug Nut | 103 (140) | ||
| INCH Lbs. (N.m) | |||
| "A" Pillar Upper Trim Finisher | 18 (2) | ||
| Alarm Sounder Bracket Nut | 71 (8) | ||
| Parking Brake Cable-To-Backplate Screw | 71 (8) | ||
| Parking Brake Cable Backplate-To-Upper Control Arm Screw | 44 (5) | ||
| Precharge Pump Bolt | 71 (8) | ||
| Rear ABS Sensor Screw | 71 (8) | ||
|
|||