Removal & Installation: Starter: Removal

1. Remove battery. See BATTERY  .
2. Remove battery carrier. See BATTERY CARRIER  .
3. Release starter motor solenoid terminal cover. Remove nut securing battery lead to solenoid and disconnect battery lead.
4. Disconnect Lucar connector from starter solenoid.
5. Remove 3 bolts securing starter motor to gearbox noting that the left hand bolt also secures the mounting bracket for the Crankshaft Position (CKP) sensor multiplug.
6. Maneuver and remove starter motor.

Fig 1: Removing & Installing Starter Motor

Courtesy of LAND ROVER NORTH AMERICA, INC.