FixVault
Home › Land Rover › 2003 › Freelander S › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Management System - Siemens › 18.30.24 Sensor - camshaft position (CMP) › Refit

18.30.24 Sensor - camshaft position (CMP): Refit

  1. Clean CMP sensor and mating face.
  2. Lubricate new seal with clean engine oil and fit to CMP sensor.
  3. Position CMP sensor, fit and tighten bolt to 8 Nm (6 lbf.ft).
  4. Feed CMP sensor lead behind multiplug bracket, align bracket, fit bolt and tighten to 8 Nm (6 lbf.ft).
  5. Connect CMP sensor multiplug and secure to bracket.
  6. Fit engine acoustic cover.

    INSTALLATION

  7. Connect battery earth lead.
About FixVault