FixVault
Home › Land Rover › 2003 › Freelander S › Repair and Diagnosis › Transmission › Automatic Trans › Removal & Installation - Automatic Transaxle › Removal & Installation › Front Console › Installation

Front Console: Installation

  1. Position switch pack assembly, fit and tighten screws.
  2. Position console to fascia.
  3. Connect multiplugs and bulb holder to switch pack.
  4. Connect multiplugs to gear selector.
  5. Fit center console.
  6. Fit and tighten screws securing center and sides to console.
  7. Fit and tighten screws securing switch pack to console.
  8. Fit and tighten screws to top of console.
  9. Position radio cage to console and secure with retaining tags.
  10. Position heater control panel, fit and tighten screws.
  11. Fit heater control knobs.
  12. Fit gear lever knob.
  13. Fit radio.
  14. Fit rear console.
About FixVault