FixVault
Home › Land Rover › 2003 › Freelander SE › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › 70.35.25 Cable - handbrake › Refit

70.35.25 Cable - handbrake: Refit

  1. Maneuver cable into position and secure floor grommet.
  2. Fit and secure handbrake cable to backplate.
  3. Fit brake shoes.

    Refer to BRAKE SHOES - REAR SET .

  4. Align cable clips, fit bolts and tighten to 22 Nm (16 lbf.ft).
  5. Secure cable in chassis clip.
  6. Connect handbrake cable to equalizer.
  7. Ensure spring is in place and fit equalizer to adjusting rod.
  8. Fit cable adjusting nut.
  9. Fit cable retaining plate, fit bolts and tighten to 22 Nm (16 lbf.ft).
  10. Adjust handbrake cable.

    Refer to CABLE - HANDBRAKE - CHECK AND ADJUST .

  11. Fit ash tray and cigar lighter to rear console.
  12. Fit road wheel(s).

    See "Road Wheel Nuts" in TORQUE SPECIFICATIONS .

  13. Remove stands and lower vehicle.
About FixVault