On-board Monitor

Selecting the 'On-board monitor' option displays the 'On-board monitor version' screen as follows.

• SW level
• HW level
• DIAG index
• Bus index
• Encoding index
• Supplier.

If version is selected the 'ON BOARD MONITOR VERSION' screen will be displayed as described above.

• Version
• Key function
• Brightness- the screen brightness can be adjusted by selecting this option.

Select the 'Key function' menu by rotating the LH rotary control and depressing it. The 'ON-BOARD MONITOR KEY FUNCTION' screen will be displayed. This allows each key on the display unit to be checked for operation. The screen also shows the following information:

• Key, the screen will show FF if no keys are pressed or FEH if several keys are pressed. The KEY box will change to reflect the button that has been pressed
• OBM increm sensor- The 'OBM increm sensor' box changes its value as the RH rotary control is turned
• Radio increment sensor- The 'OBM increm sensor' box changes its value when the LH (audio) rotary control is turned.