FixVault
Home › Land Rover › 2003 › Range Rover › Repair and Diagnosis › Engine Mechanical › Starters › Removal & Installation › Starter Motor › Installation

Starter Motor: Installation

  1. Clean starter motor and mating face. Clean dowel and dowel hole.
  2. Connect starter motor breather pipe.
  3. Position starter motor, connect starter motor leads and tighten nuts securing starter motor leads to specification. See TORQUE SPECIFICATIONS .
  4. Connect battery lead to starter motor and tighten nut securing battery lead to starter motor to specification. See TORQUE SPECIFICATIONS .
  5. Install starter motor, install 2 bolts and tighten bolts securing starter motor to specification. See TORQUE SPECIFICATIONS .
  6. Install heat shield, install 2 bolts and tighten bolts securing heat shield to starter motor to specification. See TORQUE SPECIFICATIONS .
  7. Install right exhaust manifold.
  8. Install air intake plenum.
  9. Connect battery ground lead.
About FixVault