Drive Cycle B
- Switch ignition on for 30 seconds.
- Ensure engine coolant temperature is less than 60°C (140°F).
- Start the engine and allow to idle for 2 minutes.
- Perform 2 light accelerations, i.e. 0 to 35 mph with light pedal pressure.
- Perform 2 medium accelerations, i.e. 0 to 45 mph with moderate pedal pressure.
- Perform 2 hard accelerations, i.e. 0 to 55 mph with heavy pedal pressure.
- Allow engine to idle for 2 minutes.
- Connect a generic scan tool and, with the engine still running, check for fault codes.