FixVault
Home › Land Rover › 2003 › Range Rover › Repair and Diagnosis › Suspension › Wheel Alignment › Specifications & Procedures › Wheel Alignment Procedure › Steering Geometry Adjustment › Adjustment › Front Wheel Alignment Toe In/Out Adjustment

Front Wheel Alignment Toe In/Out Adjustment

  1. Set steering to straight ahead position and ensure pinion timing marks are aligned.
  2. Mark position of steering ball joints for reference. See Figure. Loosen track rod end locknut.
    3. CAUTION: Both track rods must be rotated an equal amount.
  3. Adjust by rotating track rod using hexagon on shaft. DO NOT allow gaiter to twist.
  4. Recheck front wheel alignment. Tighten track rod end locknut to 55 N.m (40 lbf. ft).
  5. Connect battery ground lead. See DISCONNECTING & RECONNECTING BATTERY  under SERVICE PRECAUTIONS.
About FixVault