Oxygen Sensor (O2)
WARNING: This page does not describe the selected car, but rather 3527 other vehicles, including the 2003 Lincoln Blackwood, 2002 Volvo V70, 2002 Volvo V40, 2002 Volvo S80, and 2002 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This article is provided for general information only. Not all information applies to all makes and models. For more complete information, see appropriate article(s) in the ENGINE PERFORMANCE Section.
The O2 sensor is mounted in the exhaust system where it monitors oxygen content of exhaust gases. Some vehicles may use 2 O2 sensors. The O2 sensor produces a voltage signal which is proportional to exhaust gas oxygen concentration (0-3%) compared to outside oxygen (20-21%). This voltage signal is low (about .1 volt) when a lean mixture is present and high (1.0 volt) when a rich mixture is present.
As ECM compensates for a lean or rich condition, this voltage signal constantly fluctuates between high and low, crossing a reference voltage supplied by the ECM on the O2 signal line. This is referred to as cross counts. A problem in the O2 sensor circuit should set a related trouble code.