FixVault
Home › Land Rover › 2006 › LR3 Base › Repair and Diagnosis › Transmission › Transfer Case › Four-Wheel Drive Systems › Four-Wheel Drive Systems › Removal And Installation › High/Low Range Sensor › Installation

High/Low Range Sensor: Installation

  1. To install, reverse the removal procedure.
    • Clean the components.
    • Tighten the Torx bolts to 10 Nm (7 lb.ft).
  2. Install the crossmember.

    For additional information, refer to: Transmission Support Crossmember information.

  3. Use T4 to re-calibrate a new mode sensor.
About FixVault