Front Drive HALFSHAFTS: Specifications
WARNING: This page is about a different car, the 2009 Land Rover Range Rover, 2008 Land Rover Range Rover, and 2007 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATION
| Item | Specification |
|---|---|
| Type | Fully floating, fixed length, solid shafts incorporating constant velocity joints at each end of shaft |
LUBRICANT
| Item | Specification |
|---|---|
| Outboard joint | Use grease supplied with replacement boot kit |
| Inboard joint | Use grease supplied with replacement boot kit |
GENERAL SPECIFICATION
| Item | Specification |
| Type | Fully floating, solid shafts incorporating 'plug-in' constant velocity joint at inboard end and fixed constant velocity joint at outboard end of shaft |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| * Stabilizer bar link nut | 100 | 74 |
| * Stabilizer link nut | 100 | 74 |
| * Tie rod end ball joint nut | 80 | 59 |
| *+ Halfshaft retaining nut | 420 | 311 |
| Road wheel nuts | 140 | 103 |
* New nut must be fitted
+ Stake nut on completion