FixVault
Home › Land Rover › 2006 › Range Rover HSE › Repair and Diagnosis › External Pages › Different car › Section 76 (Video) › Video System › Removal And Installation › Video System Module › Installation

Video System Module: Installation

WARNING: This page is about a different car, the 2009 Land Rover Range Rover, 2008 Land Rover Range Rover, and 2007 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the video system module.
    • Install the bolt and tighten to 10 Nm (7 lb.ft).
  2. Connect the 2 coaxial cables.
  3. Connect the 2 electrical connectors to the video system module
  4. Install the LH loadspace trim panel.
About FixVault