Front Disc Brake: Specifications
WARNING: This page is about a different car, the 2006 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
| Disc type | Ventilated |
| Disc diameter: | |
| V6 Diesel engine vehicles without Brembo brakes | 320 mm (12.6 in) |
| V8 Petrol engine vehicles without Brembo brakes | 340 mm (13.5 in) |
| Vehicles with Brembo brakes | 360 mm (14.1 in) |
| Disc thickness: | |
| New | 30.0 mm (1.18 in) |
| Service limit | 27.0 mm (1.063 in) |
| Maximum disc run-out - disc installed | 0.05 mm (0.002 in) |
| Vehicles without Brembo brakes: | |
| Caliper type | Sliding pin, twin piston |
| Piston diameter | 48.0 mm (1.9 in) |
| Pad minimum thickness | 3.0 mm (0.12 in) |
| Vehicles with Brembo brakes: | |
| Caliper type | Fixed, opposing four piston |
| Piston diameter | 46 mm (1.8 in) |
| Pad minimum thickness | 3.0 mm (0.12 in) |
| Brake pad wear warning lead: | |
| Location | Front left hand brake pad |
| Activates at | 75% of pad life utilized |
TORQUE SPECIFICATIONS VEHICLES WITHOUT BREMBO BRAKES
| Description | Nm | lb-ft |
|---|---|---|
| Brake caliper bleed screw | 14 | 10 |
| Brake caliper to anchor plate bolts | 35 | 26 |
| Brake disc Torx screw | 35 | 26 |
| Brake caliper anchor plate to wheel knuckle bolts | 275 | 202 |
| Brake hose union | 32 | 24 |
| Brake hose retaining bracket to wheel knuckle bolt | 22 | 16 |
| Road wheel nuts | 140 | 103 |
TORQUE SPECIFICATIONS VEHICLES WITH BREMBO BRAKES
| Description | Nm | lb-ft |
|---|---|---|
| Brake caliper bleed screw | 19 | 14 |
| Brake disc Torx screw | 35 | 26 |
| Brake caliper to wheel knuckle bolts | 275 | 202 |
| Brake hose union | 32 | 24 |
| Brake hose retaining bracket to wheel knuckle bolt | 22 | 16 |
| Road wheel nuts | 140 | 103 |