FixVault
Home › Land Rover › 2010 › LR2 › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Climate Control System › Climate Control › Removal And Installation › Plenum Chamber › Removal

Plenum Chamber: Removal

  1. Remove the RH wiper arm. Refer to WIPER PIVOT ARM .
  2. Repeat the above procedure for the other wiper arm.
  3. See figure
    GJ0021058
  4. See figure
    GJ0021215
    5. WARNING: This step requires the aid of another technician.
  5. Remove the plenum chamber panel.
  6. See figure
    NOTE: Do not disassemble further if the component is removed for access only.
    GJ0021216
About FixVault