Instrument Panel And Console: Specifications
WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Floor console lid Torx bolts | 3 | 2 |
| Floor console Torx bolts | 10 | 7 |
| Passenger air bag module nuts | 10 | 7 |
| Passenger air bag module bracket Torx screws | 25 | 18 |
| Instrument panel Torx bolts | 25 | 18 |
| Heater housing to bulkhead Torx bolts | 6 | 4 |
| Ground cables to passenger/driver side lower A-pillar nuts | 10 | 7 |
| Adaptor panel(s) nuts | 10 | 7 |
| A/C lines to bulkhead bolt | 10 | 7 |
| A/C lines to body nuts | 10 | 7 |
| EGR coolant crossover pipe bolts | 10 | 7 |
| Instrument panel carrier to bulkhead Torx bolt | 25 | 18 |
| Instrument panel upper section to body bolt | 10 | 7 |
| Instrument panel center bracket Torx bolts | 25 | 18 |
| * Steering column intermediate shaft nut | 22 | 16 |
| Transmission selector lever bolts | 10 | 7 |
| Front door bolts | 10 | 7 |
| Door check strap to A-pillar bolts | 10 | 7 |
| Steering column switch assembly Torx bolts | 3 | 2 |
| Transmission selector lever mount bracket bolts | 10 | 7 |
* New nut must be installed