Axle Tube: Installation
WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Install the axle tube.
- Clean the component mating faces.
- Early models: Install a new O-ring seal.
- Later models: Apply sealant to the mating face. See SPECIFICATIONS . .
- Tighten the 4 axle tube bolts to 50 Nm (37 lb.ft).
- Tighten the axle tube bushing bolt to 63 Nm (46 lb.ft).
- Install the RH halfshaft. Refer to Front Halfshaft RH .