FixVault
Home › Land Rover › 2012 › LR2 Base › Repair and Diagnosis › External Pages › Different car › Section 281 (Speed Control -- XF/X260) › Speed Control › Adaptive Speed Control Module › Removal And Installation › Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11701192
    • Install the 3 retaining bolts for the adaptive speed control module. Torque Specification: 5 Nm 
    • Connect the electrical connector.
  2. Install the front bumper. Refer to Front Bumper
  3. Connect the startup battery ground cable. Refer to Battery Disconnect And Connect
  4. Check the alignment of the speed control sensor. Refer to: Adaptive Speed Control Module Adjustment 
About FixVault