Rear Disc Brake: Specifications
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
| Disc type | Ventilated |
| Disc diameter: | |
| Vehicles with 4.0L or 2.7L diesel engine | 325 mm (12.7 in) |
| Vehicles with 5.0L or 3.0L diesel engine | 354 mm (13.9 in) |
| Disc thickness - All engines: | |
| New | 20.0 mm (0.78 in) |
| Service limit | 18.0 mm (0.71 in) |
| Maximum disc run-out - disc installed | 0.09 mm (0.003 in) |
| Caliper type | Sliding pin, single piston |
| Piston diameter | 45.0 mm (1.7 in) |
| Pad minimum thickness | 3.0 mm (0.12 in) |
| Brake pad wear warning lead: | |
| Location | Rear right hand brake pad |
| Activates at | 75% of pad life utilized |
Torque Specifications
| Description | Nm | lb-ft |
|---|---|---|
| Brake caliper bleed screw | 10 | 7 |
| Brake caliper housing to anchor plate bolts | 35 | 26 |
| Brake hose union | 32 | 24 |
| Brake disc Torx screw | 16 | 12 |
| Brake caliper anchor plate to wheel knuckle bolts | 115 | 85 |
| Road wheel nuts | 140 | 103 |