FixVault
Home › Land Rover › 2012 › LR2 Base › Repair and Diagnosis › External Pages › Different car › Section 497 (MULTIFUNCTION Electronic Modules -- LR2/L359) › MULTIFUNCTION Electronic Modules › Front Door Module › Removal And Installation › Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Connect the battery ground cable.

    Refer to: Specifications

  3. If a new component has been installed, configure using Land Rover approved diagnostic equipment.
About FixVault