Piston Pin To Bore Diameter
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The piston and piston pin form a matched pair. Do not mix up the components.
- Measure the diameter of the piston pin bore.
- Measure the diameter in two directions.
- If the values are not to specification, install both a new piston and a new piston pin.