FixVault
Home › Land Rover › 2012 › LR2 Base › Repair and Diagnosis › Transmission › Transmission Control Systems › Automatic Transmission/Transaxle External Controls › Automatic Transmission/Transaxle External Controls (Vehicles With: AWF21 6-Speed Automatic Transmission) › General Procedures › Selector Lever Cable Adjustment

Selector Lever Cable Adjustment

  1. Check the operation of the transmission selector lever.
  2. Remove the gear selector knob. See SELECTOR LEVER KNOB .
  3. See figure
    GJ0021142
    4. CAUTION: Make sure that the selector lever and the gearshift mechanism are in the park (P) position.
  4. Release the selector cable adjuster.
    GJ0021962
  5. See figure
    CAUTION: Make sure that the selector lever and the gearshift mechanism are in the park (P) position.
    GJ0021963
  6. Lock the selector cable adjuster.
    GJ0021964
  7. Secure the gear selector cover.
  8. Install the gear selector knob. See SELECTOR LEVER KNOB .
About FixVault