FixVault

Low Tire Pressure Module: Installation

  1. Install the low tire pressure module.
    • Tighten the bolts to 10 Nm (7 lb.ft).
    • Connect the electrical connectors.
  2. Secure the LH side of the headliner.
    • Carefully secure the clips.
  3. Install the LH passenger assist handles.
    • Install the screws.
    • Install the screw covers.
  4. Install the sun visor retaining clip.
    • Install the screw.
    • Install the screw cover.
  5. Install the LH sun visor.
    • Install the screws.
    • Install the screw covers.
    • Connect the electrical connector.
  6. Install the LH C-pillar upper trim panel. Refer to C-Pillar Upper Trim Panel article.
  7. Install the LH B-pillar upper trim panel. Refer to B-Pillar Upper Trim Panel article.
  8. Install the LH A-pillar upper trim panel. Refer to A-Pillar Trim Panel article.
  9. Connect the battery ground cable. Refer to Specifications article.