FixVault
Home › Land Rover › 2012 › LR4 Base › Repair and Diagnosis › Transmission › Transfer Case › Four-Wheel Drive Systems › Four-Wheel Drive Systems › Removal And Installation › Transfer Case Shift Motor › Installation

Transfer Case Shift Motor: Installation

    CAUTION: Make sure that new bolts are installed.
  1. Install the shift motor.
    • Clean the components.
    • Tighten the Torx bolts to 25 Nm (18 lb.ft).
    • Connect the electrical connector.
  2. Install the transmission crossmember. Refer to Transmission Support Crossmember - 5.0L and Transmission Support Crossmember - 3.0L Diesel article. Refer to Transmission Support Crossmember - 4.0L/2.7L Diesel article.
  3. Calibrate a new transfer case shift motor using the diagnostic tool.
About FixVault