Dynamic Response Module: Removal
WARNING: This page is about a different car, the 2010 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The dynamic response module is always located on the driver's side of the vehicle.
- Remove the cowl side trim panel. For additional information, refer to Cowl Side Trim Panel
.
- Remove the closing trim panel.
- Release the clip.
- Remove the 2 screws.
- Disconnect the electrical connector.
- Remove the dynamic response module.
- Remove the 2 bolts.
- Disconnect the 2 electrical connectors.