FixVault
Home › Land Rover › 2012 › Range Rover HSE › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Control Components › Control Components › Removal And Installation › In-Vehicle Temperature Sensor › Removal

In-Vehicle Temperature Sensor: Removal

  1. Fully extend the steering column for access.
    GJ0013622
  2. Remove the instrument panel access panel.
    • Release the 2 clips.
    GJ0016989
  3. Remove the steering column upper shroud.
    • Release the 6 clips.
    GJ0016990
  4. Remove the steering column lower shroud.
    • Remove the 3 Torx screws.
    • Release the steering column adjustment lever.
    GJ0016991
  5. Remove the steering column side trim panel.
    • Release the clips.
    • Repeat the above procedure for the other side.
    GJ0014053
  6. Release the steering column gaiter panel.
    • Remove the 2 Torx screws.
    • Release the 2 clips.
    GJ0014054
  7. Remove the in-vehicle temperature sensor.
    • Release the 2 clips.
    • Disconnect the electrical connector.
    • Disconnect the hose.
About FixVault