ATC Module: Notes
WARNING: This page is about a different car, the 2016 Land Rover LR4, 2015 Land Rover LR4, and 2014 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
The ATC module is mounted on the outboard end of the air inlet duct, behind the front passenger side of the instrument panel.
The ATC module processes inputs from the center instrument panel switch pack, system sensors and the medium speed CAN (controller area network) bus, then outputs the appropriate control signals to the A/C system and the heating and ventilation system. In addition to controlling the A/C system and the heating and ventilation system, the ATC module also controls the following:
- The front seat heaters.
For additional information, refer to: Seats .
- The rear window heater.
For additional information, refer to: Glass, Frames and Mechanisms .
- The windshield heater.
For additional information, refer to: Glass, Frames and Mechanisms .
- The windshield washer jets and exterior mirror heaters.
For additional information, refer to: Rear View Mirrors .